Serial quantity data is based on information provided by associates from the Dan Wesson Discussion board. No records can be obtained from the various Dan Wesson businesses, and we depend on information/recollections of primary purchasers, paperwork retained with the pistol, dated barrel wrappers, and many others. to determine an approximate day of manufacture.
There exists also a SuperRam Silhouette Edition accessible in many calibers, Norwich generation having an beneath cut patridge front sight covered using a slab-sided hood, the rear sight can be a Bomar with eighteen clicks for each revolution. These guns are marked using a SRS-1 on the barrel hood.
As a result of Dan Wesson interchangeable barrel system, when the guns were bought, the barrel size and type was commonly part of the model designation. Of course this would change When the consumer changed the barrel, but it is however a fascinating A part of the Dan Wesson equation.
I have found some posts below about possible dates of 1978 for serial figures starting in sixteen**** but I recently picked up a an aged Pistol pack in the original brown Dan Wesson case While using the manufacturing unit unpleasant yellow masking over the foam. Mine may be the full lug model 357 and my serial number starts off off with 136*** and has Monson, Mass stamped earlier mentioned the serial.
When Bob Serva purchased the Dan Wesson firm and moved it to Norwich NY, he retooled the shop with all new CNC equipment and the initial guns he developed had been marked “Initial issue” they went back again to labeling the model fifteen and 715 dropping the -2.
And early Dan Wesson revolvers Possess a cylinder catch bump-cease pressed in the aspect plate. This bump during the aspect plate, retains the cylinder from slipping off while it's open up.
I already have a single I bought from Eric. The problem is I am unable to discover a very good diagram to point out in which it goes over the model fifteen.
If you discover This page beneficial, please think about a donation toward internet site managing costs. All contributions are significantly appreciated!
Palmer was up and working making all the big and supermag guns prior to closing Monson. Evenarge frames marked Monson had been ,we now know, in dan wesson gift card actual fact manufactured for the Palmer plant.
Under the foam I found a price record from 1978, the colored tri-fold sales flyer with the offerings from Dan Wesson, the instruction booklet and authentic lifetime warranty card. It seems this was manufactured in 1978 or later on from what I found underneath the foam. The only thing missing was the feeler gauge as well as the belt buckle.
1). Standard barrels owning the strong rib with no heavy underlug were generally designated through the barrel duration alone.
Motivated through the Beuhler mount but does not need removing the rear sight. Not sure the number of had been built, but I'm really sure that selection is perfectly "south" of 20.
Problen I am having is I have the Burris - 410385. It will likely not work on my 744SS. It appears accurately much like the 1 you have got posted. Did DW make unique top ribs for this model?
I've arrived at out to Dan Wesson effectively CZ United states to discover if they have got previous records. I feel this will be around 1978 as being a guess from the serial amount and pamphlets.